Home Contact Us Hotline: 65 6862 2467 Sitemap
Home>Products>Standard Fabric

Standard Fabric

"Widely used in public housing projects, Lee Welded Mesh’s Steel Welded Mesh is one of the prefabrication solutions aimed to help customers in increasing productivity in construction. We also help our customers to convert the conventional reinforcement bar design to Steel Welded Mesh especially for Slab and RC Wall, in order to increase the productivity and buildability / constructability We do this by working closely with customers to deliver solutions that are customised to the projects. It also redefining concepts of time, inventory and manpower management, and material wastage reduction."

Advantages of welded mesh

- Flexibility and controlled manufacturing to suit any structural requirement either in flat sheet or shaped form. - High and consistent quality welded mesh delivered just-in-time to site. - Improved site productivity with reduced reliance on manpower on-site. - Material wastage is controlled and reduced. - Better utilisation of on-site space and logistics. - Steel Welded Mesh conforms to SS 32 : 1999 (Ribbed Wire) or SS561 : 2010 or BS4483 : 2005. - Using of Steel Welded Mesh enables efficient construction. Projects get competitive edge and reduced construction cost due to enhanced speed of construction.

imgSTANDARD FABRIC
SS 561 : 2010 Main Wire Cross Wire Cross Sectional Area
(mm2/m)
Mass Per Unit (kg/m2)
Mesh Ref. Diameter (mm) Spacing (mm) Diameter (mm) Spacing (mm) Main Cross
WA13 13 200 13 200 664 664 10.42
WA12 12 200 12 200 566 566 8.88
WA10 10 200 10 200 393 393 6.16
WA9 9 200 9 200 318 318 4.99
WA8 8 200 8 200 252 252 3.95
WA7 7 200 7 200 193 193 3.02
WA6 6 200 6 200 142 142 2.22
 
WD13 13 100 13 100 1327 1327 20.84
WD12 12 100 12 100 1131 1131 17.76
WD10 10 100 10 100 785 785 12.32
WD9 9 100 9 100 636 636 9.98
WD8 8 100 8 100 503 503 7.90
WD7 7 100 7 100 385 385 6.04
WD6 6 100 6 100 283 283 4.44
 
WE13 13 150 13 150 885 885 13.89
WE12 12 150 12 150 754 754 11.84
WE10 10 150 10 150 523 523 8.23
WE9 9 150 9 150 424 424 6.67
WE8 8 150 8 150 335 335 5.27
WE7 7 150 7 150 257 257 4.03
WE6 6 150 6 150 188 188 2.96
 
WB13 13 100 10 200 1327 393 13.50
WB12 12 100 8 200 1131 252 10.90
WB10 10 100 8 200 785 252 8.14
WB9 9 100 8 200 636 252 6.97
WB8 8 100 8 200 503 252 5.93
WB7 7 100 7 200 385 193 4.53
WB6 6 100 7 200 283 193 3.73

Steel Welded Mesh with diameter 7mm and below shall be classified as non-structural use.

Steel Welded Mesh with diameter 7mm and below are subjected to stock availability.


Steel Welded Mesh's Technical Details (Link to Details)

1) Mesh Lapping Details 2) Slab Mesh Detailin 3) Mesh Anchorage 4) Conversion from Rebar to Mesh

Slab Mesh

R.C Wall Mesh

Pilecap Link-Mesh

F-Mesh